SM-G313HZ firmware/stock rom to unbrick your phone
Im done uploading the firmware or stock rom for SM-G313HZ or the Samsung Galaxy V. Reuploaded the file in devhost. Check the firmware below. The firmware is SMART (Philippines) variant.
Update --- Due to some reports that the firmware is corrupted I re-uploaded the file. And you don't need to use HJSPlit to unpack or extract the firmware.
You need to download several files including the firmware
Odin --> Odin 3.07
Firmware -- > G313HZ_DBU0ANH1_OLB0ANH1
Firmware --> Part 2
Firmware --> Part 3
Firmware --> Part 4
Samsung Driver -- > SamsungDriver
"Extract these files in your desired folder"
Installing the driver
1. Install driver first just keep on hitting next.
2. After installing the driver Press and Hold Volume Down + Home Key + Power Button, a selection will appear if you would like to go in Download Mode, Press Volume Up to proceed in Download Mode.
3. Connect your phone in the PC via USB Cable
4. Wait for it to finish installing the driver.
"Note: Sometimes it is better to reboot your PC. After installing the driver."
BEFORE PROCEEDING IN FLASHING MAKE SURE THAT THE BATTERY IS FULLY CHARGED OR 50% CHARGED.
Flashing your Phone
1. Open Odin 3.07
2. Load the following file. PDA, Phone, CSC. No need to overwrite Boot. And its okey to not include the pit file. If you are only fixing bootloop. If you are fixing damage baseband include the PIT file and bootloader, because that is what I did when i fixed the damaged baseband when unlocking the phone in Z3x.
PIT --> VIVALTO3GVN_DB_OPEN.pit
Bootloader --> BL_G313HZDBU0ANH1_1946331_REV04_user_low_ship.tar.md5
PDA --> AP_G313HZDBU0ANH1_1946331_REV04_user_low_ship.tar.md5
Phone --> CP_G313HZDXU0ANH1_1946331_REV04_user_low_ship.tar.md5
CSC --> CSC_OLB_G313HZOLB0ANH1_1946331_REV04_user_low_ship.tar.md5
3. Do not check repartition in option key, copy only what is shown in the picture above.
4. When you are ready to flash your phone, Press and Hold Volume Down + Home Key + Power Button, a selection will appear if you would like to go in Download Mode, Press Volume Up to proceed in Download Mode.
5. Connect your phone in the PC via USB Cable, wait for a value in the ID:COM to appear. It will turn yellow with number example: COM32, if it nothing appear close Odin an open it again and load the file again.
6. Press START to proceed flashing your phone. Wait until it is done, the phone will reboot after flashing.
I hope this tutorial help you. Drop a comment if there is something is not clear to you. Cheers! ^_^
Related Post
