Cherry Mobile Snap 2.0 Firmware / Stock ROM

Go to link Download
I uploaded a new firmware for Cherry Mobile Snap 2.0. This is for Cherry Mobile 2.0 to make it clear. Do not try to flash your Cherry Mobile Snap version 1.0 because I have not tried it in version 1.0. To use the file you need to download Research Download. You can find it in Tools section in the right of my blog. If you are having hard time finding it I will post the link. The tutorial is for Snap with Spreadtrum chipset not with the MTK one.




If you do not have the driver. I also provide the driver. Or you can go to my Tools section and find MTK SPD Driver.

TOOLS
ResearchDownload --> DOWNLOAD HERE
Firmware --> Download HERE
Driver -- > DOWNLOAD HERE

DOWNLOAD THE FILES, AND EXTRACT. INSTALL DRIVER.

There are two ways you can use this firmware.
1. To fully flash your phone
2. To remove password, pattern lock, and gmail account.

TO remove password, pattern lock and gmail account.
1. Open Researchdownload
2. Load packet and look for file(first button)
3.  Check only the following
✓FDL1✓FDL2✓UserData
4. Click in calibration page, and UNCHECK ALL and press OK
5. And lastly press the Play button to continue flashing.

TO fully flash your phone.
1. Open Researchdownload
2. Load packet and look for file(first button)
3. Remove check in the following selection
✓EraseRuntimeNV
✓PHASE_CHECK
✓EraseCache
✓EraseData
✓EraseMisc
4. Click in Calibration/BACK UP page, and UNCHECK ALL and press OK
5. And lastly press the Play button to continue flashing.

I hope this tutorial help you recover your phone :)
Go to link Download

Related Post

di
Label: , , , ,